TPSMB11A

TYPICAL APPLICATIONS

Use in sensitive electronics protection against voltage

transients induced by inductive load switching and lighting

on ICs, MOSFET, signal lines of sensor units for consumer,

computer, industrial, automotive and telecommunication.

FEATURES

• Junction passivation optimized design

passivated anisotropic rectifier technology

• TJ = 185 °C capability suitable for high reliability

and automotive requirement

• Available in uni-directional polarity only

• 600 W peak pulse power capability with a

10/1000 μs waveform, repetitive rate (duty cycle): 0.01 %

• Excellent clamping capability

• Very fast response time

• Low incremental surge resistance

• Meets MSL level 1, per J-STD-020, LF maximum peak of

260 °C

• AEC-Q101 qualified

• Material categorization: for definitions of compliance

MECHANICAL DATA

Case: DO-214AA (SMB)

Molding compound meets UL 94 V-0 flammability rating

Base P/NHE3 - RoHS compliant, AEC-Q101 qualified

Terminals: Matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

HE3 suffix meets JESD 201 class 2 whisker test

Polarity: Color band denotes cathode end

Notes

(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2

(2) Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads at each terminal

(3) Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum

PRIMARY CHARACTERISTICS

VBR 6.8 V to 43 V

VWM 5.50 V to 36.8 V

PPPM 600 W

IFSM 75 A

TJ max. 185 °C

Polarity Uni-directional

Package DO-214AA (SMB)

DO-214AA (SMB)

MAXIMUM RATINGS (TA = 25 °C, unless otherwise